[lists]
0=&Startup, Engine Start Checklist
1=&Runup, Engine Runup Checklist
2=&Takeoff, Takeoff Checklist
3=&Cruise, Cruise Checklist
4=&Descent, Descent Checklist
5=&Landing, Landing Checklist

[0]
0=Mixture - RICH
1=Carb Heat - OFF
2=Master/Batt Switch - ON
3=Auxiliary Fuel Pump - ON (Check pressure .6 to 8 PSI)
4=CLEAR PROP
5=Ignition Switch - ON LEFT
6=Starter - PRESS
7=Ignition Switch - TO BOTH
8=Oil Pressure - CHECK
9=Auxiliary Fuel Pump - OFF

[1]
0=Brakes - ON
1=Throttle - SET 1800 RPM
2=Engine Inst - CHECK
3=Magneto - MAX RPM DROP 175 EACH. MAX DIFFERENCE 50 RPM
4=Carb Heat - CHECK
5=Trim - SET
6=Controls - FREE
7=Flight Inst - SET and CHECK
8=Transponder - SET

[2]
0=Flaps - UP
1=Mixture - RICH
2=Carb Heat - OFF
3=Auxiliary Fuel Pump - ON
4=Brakes - OFF
5=Throttle - FULL OPEN
6=Elevator - Raise nosewheel at 50 KIAS to 55 KIAS.
7=Climb Speed - 90 KIAS

[3]
0=Auxiliary Fuel Pump - OFF
1=Power - SET at 2200 to 2700 RPM
2=Lean - AS REQUIRED
3=Fuel Quantity - CHECK

[4]
0=Power - SET as required
1=NOTE: While descending, avoid continuous operation at engine speeds between 1850 and 2250 RPM.


[5]
0=Mixture - FULL RICH 
1=Auxiliary Fuel Pump - ON
2=Carburetor Heat - ON if required
3=Flaps - SET as required below 103 KIAS
4=Airspeed - 65 KIAS to 70 KIAS
5=Touch Down on Main gear